23 GHz Linear Balanced PhotoReceiver, Hermetically Sealed (BPR-23-D-HS)

Data Sheet

Product Overview

The Optilab BPR-23-D-HS series is a linear balanced photoreceiver with a configurable bandwidth up to 23 GHz, hermetically sealed for component qualification standards. In a 14-pin mini-DIL package, BPR-23-D-HS integrates a dual balanced PIN-photodiode (PD) array on a single chip and a linear Trans-Impedance Amplifier (TIA). It can be operated in either Manual Gain Control (MGC) mode or Automatic Gain Control (AGC) mode. Featuring differential conversion gain of 1500 V/W, an inbalanced response of less than 0.5 dB and a differential output voltage swing of up to 1200 mVpp, BPR-23-D-HS is the idea receiver solution for DQPSK operating up to 48 Gbit/s or for low noise analog heterodyne detection. Excellent electrical and optical phase propagation is achieved by a total skew of lower than 5 ps between the balanced signal paths.


  • Balanced linear receiver up to 23 GHz
  • 43 Gbit/s DQPSK communication systems
  • Transponder and line card designs
  • OC-768 / STM-256 systems
  • Low noise linear transmission system


  • Hermetically sealed
  • Adjustable bandwidth to 23 GHz
  • Very low skew, Near ideal matching response
  • Linear TIA with integrated VGA
  • 14 pin mini-DIL package
  • Dual GPPO for differential RF output
  • MGC and AGC mode

Feature Name Description
Electrical Specifications
Optimized Operating Wavelength 950 nm to 1650 nm
Optical Input Level +4 dBm max.
S21 3 dB Bandwidth 23 GHz typ.
Dark Current @ 25° C, 5 V 5 nA typ.
Conversion Gain 1500 V/W typ., 1300 V/W min
Imbalance of Conversion Gain 0.3 dB typ.
Optical Return Loss 30 dB typ.
Optical PDL @1550 nm 0.25 dB max.
PD Reverse Bias Voltage 3.3 V ± 0.2V
Power Supply 3.3 V ± 0.2V
Output Return Loss 8 dB @ 20 GHz
Differential Output Voltage Up to 1200 mVpp
Impedance 50 Ω
Output Coupling DC (external AC coupling required)
Impulse Response 22 ps typ.
Skew 5 ps typ. , 20 ps max.
Differential Voltage Swing 1200 mV max.
Pulse Width 22 ps typ., 25 ps max.
Skew 5 ps typ. , 20 ps max.
Equivalent Input Noise Density 100 pA/√Hz max.
Mechanical Specifications
Operating Temperature 0 °C to +75 °C
Storage Temperature -40 °C to +85 °C
Operating Humidity 85% max
Supply Current 87 mA typ., 93 mA max.
Power Consumption 275 mW typ., 307 mW max.
Housing Dimension 18 mm x 22 mm x 8.5 mm
Fiber Connector FC/APC or LC/APC
Optical Fiber SMF-28
Package Type 14 pin butterfly min-DIL
RF Connector Dual GPPO