23 GHz PhotoReceiver Module (PR-23-M)

Data Sheet

Product Overview

The Optilab PR-23-M is a 23 GHz bandwidth amplified PIN photodiode receiver module designed for RF over fiber, antenna remoting, and broadband RF signals transmission applications using single mode optical fiber. The PR-23-M utilizes a wide bandwidth PIN photodiode plus a linear Trans-Impedance Amplifier (TIA) that provides optical to RF conversion to the frequency range beyond 23 GHz. The PR-23-M is a highly linear O/E converter that can be used for every type of analog and digital signal, with remote status monitoring through a USB interface. When the PR-23-M RF over fiber receiver module is linked with the LTA-20-M lightwave transmitter module, the combination provides an excellent solution for ultra-wideband RF to fiber conversion applications. Contact Optilab for more information.

Applications

  • RF transmission over fiber to 25 GHz
  • RF/IF signal distribution
  • Satcom microwave antenna signal distribution
  • Broadband delay-line and signal processing
  • Phased and interferometric array antenna

Features

  • 3 dB S21 bandwidth, 0.01 GHz to 23 GHz
  • Highly linear for analog transmission
  • High TIA conversion gain of 1500 V/W
  • Differential dual SMA output
  • RS 232 interface via USB 2.0
  • Integrated DC block for AC coupling
  • Auto Gain Control (AGC) or Manual Gain Control (MGC) modes
  • Maximum optical input protection

Feature Name Description
General Specifications
Photodiode Wavelength Range 1250 nm to 1650 nm
Operational Bandwidth 0.005 GHz to 12 GHz
Optical Input Level +3 dBm max.
Repsonsitivity 0.65 A/W @ 1550 nm typ.
Trans-Impedance Gain 4500 typ.
S21 3 dB Bandwidth 23 GHz typ.
S22 Characteristics < -10 dB to 10 GHz typ.
Optical Return Loss -30.00 dB typ.
2nd Harmonics Distortion -60.0 dBc max.
3rd Harmonics Distortion -70.0 dBc max.
Optical PDL @ 1550 nm 0.05 dB typ., 0.1dB max.
Output Coupling AC Coupled
RF Impedence 50 Ω
Ripple over Bandwidth ±1.0 dB
Mechanical Specifications
Operating Temperature -40° C to +70° C
Storage Temperature -55° C to +85° C
Power Supply Requirements +12 V DC, 500 mA max.
Optical Connector FC/APC
RF Input Connector K Connector Female, 50 Ω
DC Connector USB
Local Alarm LED: Optional Input Power
Remote Alarms RS-232 Interface (Optional)
Dimensions 130 mm x 70 mm x 35 mm
Accessories Included 110 V - 240 V AC Adaptor & Cable
Housing Precision Mach. Anodized Aluminum

Product Requests and Consulting

If you would like more information about Optilab Products or Custom Solutions, please Submit a Product Request.

If you'd like to contact Optilab directly, you can reach a sales representative by email (JavaScript must be enabled to view this email address).